Category Archives: Roofing

Signs You Should Call a Greenville Roofing Company

Even though some people might believe that DIY is a better solution for certain cases, when it comes to roof repair, Greenville SC experts will normally recommend that you hire a professional roofing company for the job. There are many reasons for this fact, as there are a lot of things that could go wrong in the process – especially due to the unexpected ways that the local weather can affect your old roof over time.

Uncovering Hidden Issues

The first thing that a professional and experienced team of roofers can do for you is ensure that your roof is properly inspected before a roof repair job. In a lot of cases it happens that a superficial roof inspection is performed and the roof isn’t given proper attention. You might have correctly identified the leak that has been a problem for a few months, but if you haven’t considered the materials associated with your roof’s internal structure and how they may have been impacted since the leak first occurred, then it’s possible that some significant damage to your roof’s decking and underlayment will go unnoticed.

In most areas, the problem can go unnoticed for years without causing any significant additional damage. However, because of the increased humidity of the area, Greenville roofs will usually be affected to a greater extent. When you call in the experts next time, they might tell you that the entire roof has to be replaced, which could cost you tens of thousands of dollars, as opposed to just a few hundred that you’d pay for some regular roof repair work.

roof repair Greenville SC

At the First Sign of Damage, Call in the Pros!

When you’re looking for expert roof repair Greenville SC residents recommend, check out and hire the best of them, and you won’t run into any new problems for years after you have your roof properly fixed!

However, in order for that to work, you can’t delay the roof repair work. If you don’t call a professional right from the start, then chances are the problem will degenerate more and more, and over time, you’ll have to deal with additional concerns such as:

  • Recurring damage hitting only one side of your roof until you simply can’t repair it anymore and you need a complete roof replacement;
  • More money funneled into your DIY roof repair projects over time;
  • New leaks constantly springing up during even the mildest of storms;
  • Roof repair projects that seem to take longer and longer to complete, even though they are done more frequently than in the past;
  • The shortening of your roof’s overall lifespan.

At the first sign of damage, it’s best to call in your trusted local roofing experts to have a look. They will perform a thorough roof inspection, so you don’t have to worry about any of the damage falling under the radar. So even when dealing with the need for extensive roof repair, Greenville SC roofers will likely be able to come up with practical solutions that won’t cost you too much and will keep your roof in good order for years to come.

How Can You Know If Your Roof Needs to Be Replaced Rather Than Repaired?

Roofing problems can abound in some places, especially if the weather is rough and there are strong winds and hailstorms just about every summer and autumn. The issue is, however, that even though a roof can be fixed, you don’t really know if it will hold. If the roof is too old, it’s possible that even the best patchwork will no longer do the trick, so you’ll have to start considering having the roof replaced entirely.

Now, roof replacement can be expensive, and it presents homeowners with the following issues:

  • It takes a much longer time than a regular repair.
  • Depending on the roofer you hire, the workmanship can be great or awful, and if you’re not satisfied with it you might need to spend more money to get it fixed.
  • The roof you choose will likely last for the nest 15 to 50 years, so you have to make sure that you’ve made an informed and smart decision regarding the materials and products that you’ve chosen.

A roof inspection is probably the best way to determine whether or not your roof has to be replaced without actually starting to tear off shingles and check the internal structure of the roof for mold and rot. Expert Castle Rock roofing technicians have methods of checking for damage that isn’t immediately visible to the naked eye, and they have the experience to tell you if the repairs you perform will still last or not. For that, however, you will have to find an experienced and skilled roofer who knows what they’re  talking about.

Another method to determine if you should replace your roof is to simply look at the initial documents associated with the roof’s installation. Check to see what materials were used and how old the roof is. Then you can research some information about the material and determine if its actual, projected lifespan is higher or lower than its actual age. For instance, if you discover that the roof was built using asphalt shingles, then it’s clear that any age greater than 15-20 years will mean the roof has to be replaced – unless it was upgraded sometime in the near past.

Finally, problems with the decking and underlayment are similar to foundation problems, so the roof can’t survive for long with them. Except that it would be much harder to work directly on them without removing the entire roof. The good news is that in many cases the decking will be damaged severely only in one area of the roof, so if your roof is otherwise in good condition, you won’t need a complete replacement.

In such cases, it’s common that either a partial replacement or just a more expensive repair job be done. However, the roofers could recommend that the entire roof, together with the decking and underlayment, should be removed and a brand new roof installed, if the roof is too old, the decking is too old and damaged, or the homeowner wants to sell the house and is aiming for a better appraisal.

How Do You Clean a Roof in the Safest Way Possible?

One of the best maintenance practices to use to avoid roofing damage, pests, mold and other issues that could affect your roof over time is to clean your roof properly. While roof cleaning can be essential for the integrity of your roof, it can also be dangerous, since combining the prospect of climbing up on a steep ladder with slippery surfaces caused by the water you use will involve quite a bit of risk.

As a result, the best roofing companies Springfield MO offers will always tell you that it’s best to observe the right safety considerations before you even choose your ladder and ponder climbing up to inspect your roof.

Important Hazards to Consider

Safety should come before anything else. When you climb up the ladder you have to be aware of the fact that you’re exposing yourself to the danger of falling. Also, a lesser but no less problematic hazard is that of slipping or of having your ladder slip from under you  This usually happens when the ladder is old or your boots aren’t made to create the right amount of friction between your feet and the surfaces you step on, so that you can have the right degree of stability. Although slipping doesn’t mean you’ll fall, especially if you have a safety harness on, it can still present a danger of being injured.

You can also injure yourself very badly if your safety devices break. For instance, using an old, wooden ladder can present that risk, as can using a lesser quality harness or one that can’t support your weight properly. This is why probably the most essential part of staying safe while working on top of your roof is to select the right types of safety materials.

roofing companies Springfield MO

Choosing the Right Safety Equipment

Before anything else, consider that the ladder you are using has to provide you with ideal protection and grip to prevent a fall. As a result, you have to make sure that you get a sturdy metal ladder that provides for perfect grip for your feet and can be easily fastened onto the ground so that it will not slip when you climb up on it to reach the roof.

To maximize your grip, you should also invest in a pair of reliable roofing boots that are designed to prevent slipping. Choosing the best roofing shoes can help a lot when it comes to preventing a fall when the roof’s surface is wet from when you clean it.

Finally, make sure you don’t go up without using a proper harness. A harness acts as a safety net in case you actually fall, and it can even save your life in some cases.

Safety Practices You Should Use

Always move forward and make careful steps without rushing it. Cleaning your roof can be a risky task, so it’s best to do it at your own pace without trying to hurry it up.

Finally, it’s good practice to leave yourself a dry area where you can move around while retaining maximum grip for your shoes. You can keep that area dry while cleaning the rest of the roof, and then clean the remaining part right before climbing down to avoid the risk of a fall.

Top Residential Roof Designs and Materials

Lakewood roofing contractor

While commercial and industrial buildings are not very sensitive to the aesthetic appeal provided by the roofs that cover them (especially if that roof is a flat structure that is almost invisible when looking at the building from the ground), residential buildings need roofs that are functional as well as attractive. There is a very wide range of roof styles and materials available for residential roof designs – here are some of the most popular roof designs, the types of climate that each of them is best for and the materials that they are most commonly associated with.

Flat Structures

Roofing structures cannot be completely flat – even the roofs that look flat slope at least a little. In the past, the solution used to be common on commercial and industrial buildings, but as modern, minimalist architectural solutions made their way into residential constructions, flat roofs also appeared on homes.

According to a reputable Lakewood roofing contractor, the design is beneficial for many reasons. It is the best solution for high-wind areas, it is easy to install and to maintain and it is usually made from very resistant and durable materials. The most popular material solutions for sloping roofs include metal; structures composed of multiple, alternated layers of bitumen or tar and some type of aggregate, such as special granules or gravel and synthetic materials, such as EPDM or TPO. The weather-resistance and the durability of flat roofs can be further enhanced with the help of coatings – you can find special products designed for enhancing the roofing material’s resistance to the penetration of water, to UV rays and to thermal fluctuations as well.

Gable Roofs

A gable roof is a classic roof style that is composed of two slopes that meet at the top to form a ridge. The solution is suitable for classic as well as for modern roofs, the simplicity, the elegance and the option to add attractive and useful roof features, such as skylights or dormers making gable roofs one of the most popular designs today.

Gable roofs are suitable for almost any climate area – whether you need a great, durable roof for a region that gets lots of rain and snow or for a very hot or very cold region, the steep slopes of gable structures allow precipitation to leave the roof quickly, while the large attic space ensures proper roof ventilation.

The materials most commonly used on gable roofs are asphalt shingles, metal, clay and cement tiles as well as some modern materials, such as synthetic solutions, solar panels and vegetation (a solution called a green roof).

Hip Roofs

Hip roofs feature four slopes that meet at the top. These structures provide superior structural stability, being the best option for high-wind regions and they also shed rain and snow efficiently, just like gable roofs. The shape of the roof allows for creating comfortable rooms right under the roof.

The materials most commonly used for building hip roofs are the same as in the case of gable roofs – asphalt shingles, clay and cement tiles, metal shingles and tiles, slate and wood.

DIY Roofing Installation Pros and Cons

“Can I do a roof installation on my own?”  This is a question many home owners ask themselves and for a good reason: a roof installation is a big project and, because of its complexity, most pieces of advice you will get are to leave it in the hands of an experienced roofing contractor.

Professional roofers have extensive training in working with different materials and using various tools and techniques to perform installations repairs and maintenance operations safely, avoiding accidents and ensuring quality services.

A roof installed by Broomfield roofing companies comes with warranties for both the materials and workmanship, and will allow you to benefit from your insurance coverage, in the case that something goes wrong.  No insurer would pay for a roof installed by amateurs.

Broomfield roofing companies

Most people who do not opt for hiring up a professional roofing company for installing their roof justify their choice by their intention to save some money.  The truth is a roof installation is an expensive project that requires some serious budget planning. A DIY project can be cheaper than paying for professional services, but sometimes the savings are only apparent, because you may end up paying much more for the damage you cause or for unforeseen accidents.  Professional services ensure quality and minimize the risks of damage and accidents.  They are also trained to respect local building codes as well as the safety rules specific to working at heights.

However, considering that there is always a different answer for everyone, some will still prefer attempting DIY roofing projects, especially if they are skilled and experienced in roof installation.  In this case, such a project can be a real success and allow the roof owner save a considerable sum of money, which otherwise would be paid for professional workmanship.

And the advantages of a DIY roof installation are not only related to money savings.

A great benefit is that you can start such a project whenever you want it.  You will not have to worry about contractors who put you on a long waiting list or even make you wait a lot longer than expected.  When it comes to a DIY roofing project, the schedule depends exclusively on you.

A DIY project is also a good way to learn new things and become more and more experienced. However, before starting a DIY roofing installation you will have to make sure that such a project will not cost you far more than just hiring a professional roofer. As such, choose the materials carefully after doing a proper research job. Make sure they are high quality and suitable for the climate in your region, because you do not want to end up patching your roof after each storm or other severe phenomenon. Also look for special offers and discounts; roofing companies typically buy in bulk; they get discounts for this and are able to sell the materials for a lower price.

Also, do not ignore the safety equipment you need to work safely on the roof.  Working at height has a lot of risks and even professional workers can be victims of accidents if they are not careful enough. Do not make any compromise when it comes to this aspect.

Are Metal Roofs Less Expensive To Maintain?

Roofs are exposed to a great deal of aggression. Atmospheric pollutants together with water and ultraviolet radiation affect over time the coating of a metal roof (paint). The degradation process is accelerated when dirt and debris on the roof are not washed away by rain.

From the point of view of the durability of metal roofs, the most critical areas are the scratched and deformed parts where the impurities come in direct contact with the zinc layer below the paint layer; or worse, in situations where the steel layer is directly exposed to the external environment.

Thus, like any other type of roof, a metal roof needs maintenance. The good news is that this maintenance is less extensive, due to the properties of the metal. In the absence of other problems identified during the annual Snellville roofing inspections, the periodic maintenance operations include:

Snow removal

Normally, the snow will not accumulate on a metal roof and therefore will not exceed its load resistance. However, if this happens, we recommend removing the snow carefully, so that the paint layer is not affected.

Cleaning the pluvial system

The drainage system must be cleaned every year. Blocked, partially blocked or dirty gutters and downspouts maintain a humid environment, or cause the appearance of ice that can lead to corrosion. Remove any possible risk of blockage or dirt by cleaning the entire system whenever it is necessary. Repair any defects that may occur.

Snellville roofing


The overall aspect of the roof must also be checked by Snellville roofing contractors periodically. Dust and dirt cause the risk of corrosion, keeping the surface of the roof permanently moist. On the other hand, a dirty roof is also unsightly.

In general, rainwater is sufficient to keep metal roof elements clean. However, once a year, it is necessary to remove the accumulated dirt. Surfaces should be cleaned with a soft brush and pressurized water (<100 bar). You can also use organic detergents. The rinsing should be done from the roof ridge to the gutters, after the detergent has been left for a few minutes to take effect. Persistent stains can be removed using some alcohol on a piece of soft cloth.

Just keep in mind that excessive use of washing solutions can lead to damage of the roof coating.

The paint layer

Damage to the paint layer of a metal roof must be repaired as quickly as possible. For repainting, you will have to use only paints recommended by the roof`s manufacturer. If the scratches only affects the paint layer, a single application of new paint is sufficient. But if they have reached the zinc layer, then we recommend applying two layers of paint.

The edges resulting from cutting the metal are prone to corrosion if they are not painted immediately after installation. In particular, in the case of roofs located near the ocean, people should use an additional transparent varnish, resistant to salt aggression.

Before deciding on a complete roof repainting, you should check whether there are local defects and the adhesive property of the coating is good enough, otherwise there will be some additional preparation operations to perform. If major defects are detected or if the coating layer has faded unevenly, you should consult a Snellville roofing expert to establish a professional repainting plan.

What Does A Typical Roof Replacement Cost?

An important role in the construction or renovation of a house is the choice of a roof system that will prove its long-term efficiency. Each component of the roof requires special attention so that it is fully functional, watertight and durable – from the resistance structure, the thermo and waterproofing membranes, to the cover materials and the installation of the drainage system.

Obviously, a roof replacement is a complex project, which will cost you a significant sum of money, depending on the type of the roof, the materials you choose and the contractor your hire. In 2019, on average, roofing contractors charged between $3.50 and $5.50 per square foot (which means $350 to $550 per square) for replacing asphalt shingle roofs (the most common and popular roofing material). For the roof on a typical single-family house, the owner can expect to pay $4.50 per sq. ft. ($450 per square).

However, in order to be able to plan to the smallest detail the budget for the replacement of your roof, you will need to consider a number of factors that can help you estimate correctly the total price of the work.

The type of roofing materials

First of all, the total cost of the replacement project depends on the type of materials you will choose: metal or ceramic tiles, bituminous shingles, wood shakes etc. – they all have different prices.

The surface and geometry of the roof

Before contacting a manufacturer or distributor, it is best to measure your roof`s surface. This way, you can get an accurate estimated price, although keep in mind that it will be substantially influenced by the type and quantity of fasteners that you will need. Never make a decision only considering the price per square meter of a particular material, if you do not want to have unpleasant surprises! A visit from a Gaithersburg roofing specialist is what you need for a complete and correct quote.

The pluvial system

The price of purchasing and installing gutters and downspouts (or drainage holes, in the case of flat roofs) must also be considered. The pluvial system aims to protect the building from water ponding and infiltrations. The quality of a pluvial system resides in the materials used that should be resistant to corrosion, even in quasi-permanent humid conditions, UV radiation and temperature fluctuations.

Roof accessories

Each roof needs accessories to ensure its proper installation as well as the aesthetic and functional design. The best thing is to opt for accessories made or recommended by the manufacturer of the cover system.

Gaithersburg roofing


Another factor with a significant influence on the final cost of roof replacement is the team of Gaithersburg roofing specialists you hire to install the roof. You will have to carefully choose the contractor because an improperly installed roof system will automatically result in additional expenses caused by incorrect measurements faulty installation or, even worse, the loss of warranty on purchased products. Besides, each roofing company has different prices for the provided services, so you should be able to determine the best match for your budget, by comparing prices and services.

The Benefits of Spray Foam on Roofs – When to consider Spray Foam Roofing?

Why Consider Spray Foam Roofing

Spray foam is a relatively new material used for roofing purposes, but also one that is quickly gaining popularity for the great features and benefits it offers, such as energy-efficiency,

durability, resistance to the elements, easy application and low maintenance needs. Here are some of the benefits provided by spray foam roofs by flat roof repair Chicago – if you think you can use them, too, you should definitely consider getting a spray foam roof.

Seamless Construction for Improved Resistance to Water

Roofing seams – the area where two roofing components or sections are joined – are more prone to developing leaks, which also means that the more seams a roof has, the more sensitive it becomes to water penetration. Spray foam roofs are seamless, so they reduce the risk of developing leaks to the minimum.

No Leaks Around Flashing

The flashing used around chimneys, in roof valleys or around other types of openings, such as skylights are also components around which leaks can develop more easily. Spray foam conforms perfectly to the roofing substrate, forming an impermeable layer that eliminates the risk of flashing leaks.

No Ponding Water on the Roof

Spray foam can be used to create a perfectly smooth surface, without any lower areas as well as to correct the sloping angle of the existing roof to make roof draining more efficient and to eliminate ponding water.

Reduced Roof Weight

Spray foam is a very lightweight material – it weighs only around 3 pounds per cubic foot. This feature makes spray foam the perfect solution for re-roofing projects that involve buildings unable to hold too much added weight.

Excellent Thermal Protection

Spray foam is a material with excellent insulation qualities, with R-values usually in the 6.2-6.5 range, higher than in the case of many other roofing and insulation materials. A spray foam roof can be the solution you need to reduce your heating and cooling-related energy bills – the seamless construction and the outstanding heat insulation properties of the material will maintain the temperature inside the building stable and will reduce the energy necessary for cooling and heating the building, thus reducing energy bills as well.

Spray foam is also a very strong and flexible material, able to withstand the contraction and expansion caused by temperature changes, so it can be applied on roofs in areas with wide temperature variations.

Durability and Resistance to the Elements

The coating applied on spray foam roofs can protect the roof for about 15-20 years. Spray foam is resistant to water, punctures and the right type of coating makes it UV-stable as well. Spray foam is odourless and not attractive to pests, thus helping building owners eliminate one more risk.

Easy Application and Low Maintenance Requirements

Spray foam roof can be applied easily and quickly and the curing process takes only a couple of days, so the installation process causes only minimum disturbance in life of the building’s users. Spray foam is also very easy to maintain – it does require regular, six-monthly inspections and cleaning, but the issues detected on the roof will be minor and easy to correct in most cases.





A Short Guide to Picking the Best Windows for Hot Climates

Short Guide Of Helpful Tips

Window replacement is a costly project and if your home is in an area where temperatures reach very high values, the process requires lots of careful consideration – if you are currently looking at frame and glass types that can protect the thermal comfort of your home and also match the style of your building, here are a few tips about how to pick the best windows for hot climates.

Choosing the Best Frame

The frame type that you choose for your windows will directly influence the thermal balance inside your home. The most common materials used in window frames today are wood, vinyl, fiberglass and aluminium. Out of the four material, aluminium is the most affordable and the most widespread, but it transfers the heat coming from outside, rather than blocking it out, so it is not the best type for hot climate areas. Fiberglass comes in next in terms of both cost and energy-efficiency, while wood and vinyl provide the best insulation, with vinyl being the more affordable, but wood being the more attractive solution.

Choosing the Best Glass

Single-glaze windows are a thing of the past, modern windows usually consist of two or three glass panes, separated by air or by some type of inert gas to reduce heat conductivity even further. All glass panels come with ratings that you should know about:

  • The visible transmission (VT) rating indicates the amount of sunlight that is transmitted through the panes – glasses with VT values between 60-80 let more light into the house;
  • The solar heat gain coefficient (SHGC) indicates the amount of heat that the glass lets through – glass types that come with an SHCG value around 0.40 or lower allow less heat to penetrate the room, so they are better suited for hot climates;
  • The U-value measures the efficiency of the material as an insulator – look for the glass with the lowest U-value that you can afford.

There is a special glass category that is more and more popular these days: low-emissive glass. The inner side of the outermost pane of multi-pane glasses has a special coating made from a combination of metal oxides to prevent the transfer of heat between the panes, therefore these glass types work best in hot climates.

Multi-pane Glass Types

The best windows for hot climates use not only multiple panes, but some type of gas to separate the panes and to increase the energy-efficiency of the assembly. Windows that use air between the panes are the most common and the most affordable, but solutions that make use of the superior insulation properties of noble gases are more efficient and therefore more suitable for hot climates.

The most affordable and therefore the most common inert gas used for windows is argon, followed in the line by krypton, a gas that is much more expensive and used only for special windows that need to have very thin panes and by xenon that is very efficient in terms of thermal insulation, but very expensive as well.

If you still feel that choosing the best solution for your home is too difficult, turn to a seller in your town or city for more advice – the Austin roofing companies experts in the store will tell you more about best windows for hot climates and they will help make the best decision.

Methods for Protecting Roofs from Hail – The Best Way to Prevent Damage

Summer is not only a period of the year when we all enjoy the nice weather and we go on vacation – it is also a period when storms and hail become more frequent and a period when responsible homeowners must figure out the best way for protecting roofs from hail. If you have experienced hail before, you are surely familiar with the devastating force of the strong winds and of the balls of ice that come with hail and you are surely trying to figure out how to hail-proof your home right now, so here are a few ideas to help you.

hail damage roof repair

Prevention with Regular Inspections and Repairs

It is not possible to completely hail-proof your roof, but a strong and impact-resistant roof can endure much more than a weak, leaky roof. Hire a professional roofer to inspect your roof and to address common problems, such as leaks, damaged or missing ridge caps, shingles and tiles, clogged gutters or damaged roof flashing. Get the entire roof surface checked and inspected by roof Manhattan contractors. They should be looking at the flashing around the openings, the ridge caps and other areas where the roofing structure is weakened by joints. These minor repairs don’t cost much, but they are the best way to fortify your roof and to prepare it for facing hail.

Consider Roof Replacement

If your roof is old and the area where you live is likely to get really strong hail this year, too, it might be a good idea to start considering roof replacement with impact resistant materials.

Impact resistant roofing solutions use modern materials that have undergone extensive testing, including resistance tests with steel balls dropped on them to simulate how a hail storm would affect them. The most common impact-resistant materials are special shingles that are more flexible than conventional shingles and bounce back into shape after coming into contact with hail stones. Given the high resistance to very strong impact, hail resistant roofing materials provide enhanced protection not only against hail stones, but also against high winds not accompanied by ice balls as well as against sleet, heavy rain and snow.

When selecting impact resistant roofing materials, check the product specifications and look for products that make reference to impact resistance in their name and check for the product’s impact-resistance classification – currently, roofing materials are categorized into four classes of resistance, the higher the class of the material you choose, the better.

Replacing your existing roof with impact resistant roofing comes with other benefits as well. The initial investment into the special materials and the professional installation is not small, but many insurance companies offer significant discounts for homes that have impact resistant roofing systems. To know exactly how these discounts work, check with your insurer to find out about the materials that they offer discounted premiums for and about the process of participating in such an incentive program.

Protecting roofs from hail is an excellent way for homeowners to improve the overall safety of their homes – whether it is roof Manhattan preventive maintenance and repair that you choose or complete replacement, any action improves the hail-resistance of your roof.